 The original and still the leader: Rhino Hyde®...
Tandem Products, Inc. has been producing cost effective polyurethane wear products since 1965 providing solutions to your abrasion and impact concerns through continuous improvement and innovation of their product line. Gulf-Atlantic Industrial Equipment is an authorized dealer for the Tandem Products RhinoHyde® products.
Rhino Hyde® products are manufactured of tough, resilient elastomeric urethanes specifically designed for use in applications requiring abrasion resistance.
Rhino Hyde® Benefits include: lightweight, easy installation, excellent impact resistance, good low temperature properties, noise reduction, corrosion resistance and chemical resistance to aliphatic hydrocarbons, mild acids and bases.
Rhino Hyde® is recommended for use in materials handling of any abrasive material including sand, crushed aggregate, coal, taconite pellets, copper ore, phosphate rock, salt & wood chips.
|
|
 |
|
Bolt in place Chute and Hopper Liners
|
Rhino Hyde® polyurethane bolt in-place liners are designed to be fastened in place by bolting in your chute or hopper. Rhino Hyde® bolt in-place liners offer:
- Ease of installation
- Abrasion and corrosion resistant protection for your substrate
- Eliminates sticking problems in most applications
- Produced in modular shapes or standard sizes
- Available from 1/2" to 4" thick
Rhino Hyde® bolt in-place liners are fastened in place by bolting to your substrate. Rhino Hyde® liners are utilized throughout the concrete industry to provide long lasting protection for steel substrates. This liner construction is available in the following installation methods;
- Bolted through individually located plates in the urethane that are strategically placed throughout the liner
- Attached utilizing studs protruding out the back side of the liner
- Solid or expanded metal backing with pre-placed holes or can be site drilled
- Bolt in-place liners can be molded to modular shapes or purchased in sheets up to 5' X 10' (dependent on weight) that can be field cut to size.
Rhino Hyde® bolt in-place liners are recommended for transition hoppers, discharge chutes, feed boxes, trough linings and virtually any area steel wear or noise is a problem.
Back to Top
For a quotation, fill out the data sheet below and fax it to Gulf-Atlantic at 352-628-6774.
|
| Weldable Chute and Hopper Liners |
 Rhino Hyde® polyurethane weldable liners are designed to be fastened in place by welding, no drilling holes in your chute or liner are required. Rhino Hyde® weldable liners offer:
- Ease of installation
- Once the liner is sealed and the weld plug is in place, you have complete protection for your substrate
- Eliminates sticking problems in most applications
- Produced in modular shapes or standard sizes
- Available from 1/2" to 4" thick
Back to Top
 
For a quotation, fill out the data sheet below and fax it to Gulf-Atlantic at 352-628-6774.
|
| Truck Charge Hopper & Discharge Chute Liner |
 One of the main advantages is that we offer either a bolt or weld in place liner. So whatever your need, we can accommodate. Here some other advantages:
- Specially-formulated Rhino Hyde® resists wear and sticking
- 5/16" to 1/2" thickness for extended wear-life
- Light in weight
- Easy installation
- No more long shut-down times
- Bolted or welded in place
- Easy to clean
Mixing concrete is a difficult process, and is especially taxing on your mixing equipment. In recent years, the value of lining equipment has become readily apparent; however, if you're not using the proper lining materials, lining your equipment can cause excessively long shut-downs. At Rhino Hyde®, we know this, and for that reason, we have developed our High Mount Truck Hopper Liners and Truck Discharge Chute Liners.
 The Bolt-In liners and Main Chute liners have a fabric-backing. These liners are installed by applying caulking along the back-side perimeter of the liner and then securing with bolts & nuts every 10"-12" along the perimeter.
Rhino Hyde® urethane liners resist sticking and build-up inherent with rubber and steel type liners, provide easier cleanup, and wear longer than steel.
- One Piece Construction
- Fast, Bolt In Installation
- No Seams to Disrupt Flow or Collect
- Provides easier loading of Mixer and less time at the slump rack.
- Lightweight and outperforms steel.
- Economical—protects metal hopper and main chute against wear.
 Download hopper & chute data sheet:
Back to Top
For a quotation, fill out the data sheet below and fax it to Gulf-Atlantic at 352-628-6774.
|
| Urethane Pan Mixer Liners |
 Rhino Hyde® urethane pan mixer liners are available to protect your pan liner from wear and provide easy cleanup, thus reducing your maintenance costs. Benefits of Rhino Hyde® urethane liners:
- Ease of clean-up, no more chipping concrete off of your liner
- Resist sticking and buildup problems inherent in steel liners
- Outwears steel liners by 2 - 4 times (depending on the application)
- Reduces noise levels
- Reduced downtime and improved product quality
Through years of experience and working together with precast concrete producers, the Rhino Hyde® urethane group has acquired the knowledge pertaining to the requirements of precast operations. A Rhino Hyde® pan mixer liner will thoroughly protect your liner and significantly outwear your steel liner.
We realize the importance and cost of thoroughly cleaning the mixer between batches. The responses from our customers show that not only does our system protect better than other liners, it is also easier to clean and reduces noise.
Available in a bolt or weld in system, the Rhino Hyde® liner will reduce your total maintenance and increase your production and quality of product.
Available for all OEM Mixers, including:
- Voeller
- Teka
- Rapid
- Skako
- Rotomix
- Mixer Systems
- Wiggert
- Liebherr
- Stetter
- Masa
- Haarup
- others
Download Pan Mixer Dimensional Data Sheet
For a quotation, fill out the data sheet below and fax it to Gulf-Atlantic at 352-628-6774.
|
|
|
|
For more information or to receive a quotation on Polyurethane Products, click here
|
|
|
|
Toll Free:(800)792-7427 Phone:(352)628-6674 Fax:(352)628-6774