Modular Panels

Back to Top

Rhino IS™ Features & Benefits:

• Replacement panels available for full center, full side and half side panels.
• • When ordering side panels, please specify width
• • Standard width for side panels is 6 1/4" for half side and 11 13/16" for full side panels
• Panels up to 80mm thick
• Single and dual durometer materials available
• Available in 1' X 2' & 1' X 4' sizes
• Opening sizes from .65 mm to 4" square
• Delivery is stock to three weeks  

Materials:
Unlike other synthetic media suppliers, Tandem Products has developed a single durometer material that works in most applications up to -2".  A high performance dual durometer material is available and recommend in applications over -2". 

Tandem Products Guarantee:
If you are looking for a cost effective replacement panel used in WS-85 Tema Isenmann systems, look no further.   The Rhino IS™ panels have been tested and have uniformly proven to achieve wear as good or better than WS 85 panels.  

Rhino Deck™ Features & Benefits:

• Available styles
• • Rhino Deck™ pin & leg panels
• • Rhino Deck™ pin & sleeve panels
• Standard panels are 30 mm thick 
• Panels are available up to 70mm thick
• Single and dual durometer materials available
• Available in 1' X 1', 1' X 2' & 1' X 4' sizes
• Opening sizes from .65 mm to 4" square, both square and slotted openings available 
• Delivery is stock to three weeks

Materials:
Unlike other synthetic media suppliers, Tandem Products has developed a single durometer material that works in most applications up to -2".  A high performance dual durometer material is available and recommended in applications over -2". 

Tandem Products Guarantee:
If you are looking for a cost effective 1' X 1' replacement panel, look no further.   The Rhino Deck have been tested panels in numerous applications, and will provide 1.5 - 2 times the wear of standard 1' X 1' injection molded panels

 
For a quotation, fill out the data sheet below and fax it to Gulf-Atlantic at 352-628-6774.

Back to Top 

Rhino Wire™ IS HOA Features & Benefits:

• High open area when compared to WS 85 panels

• Standard panels are 30 mm thick 

• Designed to handle wet & dry applications

• Available in 1' X 2' & 1' X 4' sizes

• Opening sizes are limited, see chart below

• Delivery is stock to three weeks 

Materials:
The specialty nature of the Rhino Wire™ product design demanded the development of a high performance material.  The material utilized in the Rhino Wire™ product has provided unequaled wear during three years of production of the Rhino Wire™ hook screen.  This same material will provide exceptional wear properties in the new Rhino Wire™ IS HOA modular panels.  

Performance:
Rhino Wire™ IS HOA modular panels were run in test sites for eight months previous to the market introduction.  The performance of these panels is approximately 70 - 75 % of the life of a standard Isenmann or Rhino IS™ panel.   This life, coupled with the high open area and reasonable cost make this a very effective alternative to high priced panels.  However, if you want to match the life of your standard Isenmann panels, see our standard Rhino IS™ panels for a great alternative.

Tandem Products Guarantee: 
If you are looking for a cost effective, high open area alternative to standard Isenmann panels, look no further.  Rhino Wire™ IS HOA panels were developed to provide a cost effective, high production screening media and give you options when evaluating your screening needs.  

Approximate Open Area Table

Rhino Snap™ Features & Benefits:

• Standard panels are 38 mm thick
• Panels up to 50 mm thick
• Single and dual durometer materials available
• Available in 1' X 2' & 1' X 4' sizes
• Delivery is normally three weeks or less dependent on order size,  call Gulf-Atlantic for expedited lead-times

Materials:
Unlike other synthetic media suppliers, Tandem Products has developed a single durometer material that works in most applications up to -2".  A high performance dual durometer material is available and recommended in applications over -2". 

 Performance:
Tandem Products panels will normally outperform the Shore A 92 material utilized in original panels. 

 Tandem Products Guarantee:
If you are looking for a cost effective Dur-X-Snap Deck® replacement panel, look no further.  Tandem Products panels have been field tested for years and will provide the high quality, long life panel you are looking for.  

Back to Top

    Rhino Step™ Features & Benefits:

• Standard panels are 30 mm thick
• Lip and lap comes standard on Rhino Step™ Panels
• Only available in single durometer material
• Available in 1' X 2' size only
• Delivery is normally three weeks or less dependent on order size, call Gulf-Atlantic for expedited lead-times

Materials:
Three material choices for Rhino Step™ materials are available depending on application parameters. 

Performance:
Tandem Products panels will normally outperform the Shore A 92 material utilized in original panels. 

Back to Top 

 Rhino Deck WS™ Features & Benefits:

• Standard panels are 30 mm thick 
• Panels are available up to 50mm thick
• Single and dual durometer materials available
• Available in 1' X 1', 1' X 2' & 1' X 4' sizes
• Opening sizes from .65 mm to 4" square
• Delivery is normally three weeks or less dependent on order size, call Gulf-Atlantic for expedited lead-times

Materials:
Unlike other synthetic media suppliers, Tandem Products has developed a single durometer material that works in most applications up to -2".  A high performance dual durometer material is available and recommended in applications over -2". 

Back to Top

Rhino Max™ Features & Benefits:

• Standard panels are 30 mm thick 
• Panels are available up to 50mm thick
• Single and dual durometer materials available
• Available in 1' X 2' panels
• Opening sizes from .65 mm to 4" square
• Delivery is normally three weeks or less dependent on order size, call Gulf-Atlantic for expedited lead-times

Materials:
Unlike other synthetic media suppliers, Tandem Products has developed a single durometer material that works in most applications up to -2".  A high performance dual durometer material is available and recommended in applications over -2". 

 Back to Top 

Rhino Tec™ Panels

      Rhino Tec™ Features & Benefits:

• Panels made to standard length and width
• • When ordering panels, please provide length and width of existing panels
• Call for sizes available
• Available in solid panels when required
• Delivery is normally three weeks or less dependent on order size, call Gulf-Atlantic for expedited lead-times

Materials:
Tandem Products utilizes a specially developed high tensile strength and elongation material that performs very well in the unique aggregate environment. 

Rhino Tec™ Features & Benefits:

• Panels made to standard length and width
• • When ordering panels, please provide length and width of existing panels
• Call for sizes available
• Available in solid panels when required
• Delivery is normally three weeks or less dependent on order size, call Gulf-Atlantic for expedited lead-times

Materials:
Tandem Products utilizes a specially developed high tensile strength and elongation material that performs very well in the unique aggregate environment. 

Back to Top

• Available in most current attachment styles
• Open cast urethane for excellent wear properties
• Available in 1' X 1', 1" X 2' & 1' X 4' sizes
• Openings available down to .65mm X 12 mm slot in modular panels
• Openings available down to 1 mm X 25.4 mm in RhinoGrid hook screens
• Available with dams and diverters molded in place
• Shipment is normally three weeks, call Gulf-Atlantic for expedited lead-times

Materials:

Tandem Products utilizes a specially developed high tensile strength material that performs very well in the demanding aggregate environment. 

    Anti-Blinding screen features and benefits:

• A single homogeneous pour guarantees no delamination 
• Available in 1' X 2' & 1' X 4' sizes
• Available in Rhino IS™, Rhino Deck™, Rhino Max™
  • Some opening sizes available in Rhino Step™, call for availability
• Opening sizes from 1/8" to 9/16" square and 1/8" to 3/8" slotted 
• Shipment is normally three weeks, call Gulf-Atlantic for expedited lead-times

Materials:
The Tandem Products Anti-Blinding membrane screen utilizes a specially formulated, high elongation material that provides the "flex without breaking" required to perform effectively.  

 Back to Top

             

Gulf-Atlantic can provide full deck conversion packages for Isenmann, Polydeck pin & leg and Tyler pin & sleeve systems.  Conversion packages include; stringers, knock in bars if required, side liners, wedges, angle clips and pins & / or sleeves if required. 

 Deck conversion features and benefits:

• Conversion packages available for Rhino Is™, Tyler and Rhino Deck™ only
• Stringers available up to 24'
• Stringers for staggered and straight installations are available
• Conversion packages contain all components to complete your installation

Factory technical assistance is available if requested to ensure you are running in spec following installation.

If you are considering converting to a flat deck, contact Gulf-Atlantic to discuss all of your alternatives.  Hook screens are alternatives to a complete conversion and will provide the extended life of urethane screens without the deck conversion cost.  If your needs warrant conversion to a flat deck, we will assist in the selection of the right system for your needs.

Back to Top