Distribution Systems & Batch Feeding Systems

Continuous Mixers

The Sicoma continuous (or 'pug mill') mixer gives a stream of mixed concrete based on volumetric proportioning. Material is fed into one end from two or more aggregate conveyors, cement screw feeder and flow-metered water. The powerful twin-shaft mixing action transforms the raw materials into a continuous stream of mixed concrete suitable for RCC (Roller Compacted Concrete), flowable fill and other less critical high-volume applications.

POWER, SPEED AND RUGGEDNESS

Using the same principle and most of the same components as the Sicoma twin shaft mixer, this Sicoma continuous mixer is powerful, fast, rugged and requires little maintenance. Its bearings and shaft seals are the same as used in the twin shaft mixer.

THOROUGH MIXING ACTION

The paddles in the Sicoma Continuous mixer conveys the product down the length of the mixer and eventually out of the discharge door at the far end. Mixing is thorough and the resulting product is homogeneous.

SOLID RELIABILITY

Lubrication of the shaft seals is by the same grease pump as used in all of the Sicoma mixers. The patented triple seals are good for many years of operation with no maintenance. Bearings and seals have positive separation, to eliminate contamination and wear of the bearing even if the seal should ever leak.
Applications are in high production of roller compacted, mine backfill etc. Dump trucks can be filled by running the mix into a surge hopper while the trucks get into position. Alternatively, the whole system can be shut down while this takes place.

For a Complete Brochure on Sicoma Mixers or a Quotation, please contact Gulf Atlantic at 800-792-7427 or email us at: Info@GulfAtlanticEquipment.com.