Aggregate Industry	Cement Industry	Concrete Industry
	Power Industry	Mining Industry	Process Industry

Martin Engineering Products Are:

• Engineered to withstand operations with the material in its worst state.
• Designed to require minimal maintenance.
• Designed for ease of service so that maintenance, when required, can be performed as a routine procedure by relatively untrained personnel.
• Engineered so that clean operations will pay back the cost of the improved system many times over.

Martin Engineering Product Advantages:

• Reduce maintenance requirements and control outages.
• Improve aggregate handling by keeping conveyors clean and in alignment.
• Improve efficiency of material flow from bins and hoppers through screens, chutes, and feeders.
• Control airborne dust to improve regulatory compliance, working conditions, and community relations.
• Knock down buildups in preheater towers and dislodge “snowmen” in clinker coolers
• Reduce spillage and dust in the conveying of raw materials, clinker, and finished cement.
• Remove carryback from the quarry, coal, raw meal, clinker, and finished cement belts.
• Improve the loading and unloading of bottom-dump hopper cars.
• Prevent spillage and control dust in coal conveyance operations.
• Improve transfer point performance by stabilizing the belt line and preventing spillage

Martin Engineering Products Offered by Gulf-Atlantic:
	BIG BLASTER® HURRICANE Air Cannon  The BIG BLASTER® HURRICANE Air Cannon delivers twice the force output while requiring half the air volume as Martin Engineering’s BIG BLASTER® BB4-20-30 XHV Air Cannon. The smaller air reservoir allows this unit to fit in smaller places.
	BIG BLASTER® XHV Air Cannon Suitable for applications in temperatures above 200 F (93 C), low maintenance requirements, and a "200,000 Firings" Warranty. XHV Air Cannons offer higher force output, faster fill times, faster discharge, improved sealing to reduce air loss, and removable piston seat to simplify service. XHV Valve is engineered for all applications, including challenging, high-temperature applications such as Cement Kiln Pre-Heater Towers and Clinker Coolers.
	BIG BLASTER® XHV Air Cannon with MARTIN® TORNADO Exhaust Valve The BIG BLASTER® XHV Air Cannon with MARTIN® TORNADO Exhaust Valve produces better material flow with greater force, faster cycling and improved safety. The BIG BLASTER® XHV Air Cannon fires when the new patent-pending MARTIN® TORNADO Exhaust Valve opens in response to a positive surge of air sent by a tripped solenoid valve. This positive-acting valve amplifies the discharge force, producing up to 20% more power than a standard BIG BLASTER® XHV Valve of the same size.
	MARTIN® SHOCK BLOK™ Three-axis range of motion keeps cleaning edge in contact with belt without gouging. MARTIN® SHOCK BLOK™ Shock Absorbers cushion each positive-rake blade individually, allowing momentary conveyor reversal and splice passage without damage. One-pin blade replacement makes blade replacement an easy, one-minute, no-tool operation. MARTIN® QC #1 XHD Belt Cleaning System is system-engineered to preserve the cleaning edge from high belts speeds and multiple splices.
	MARTIN® QC #1 XHD Belt Cleaning System One-pin blade replacement makes blade replacement an easy, one-minute, no-tool operation. MARTIN® QC #1 XHD Belt Cleaning System is system-engineered to preserve the cleaning edge from high belts speeds and multiple splices.
	MARTIN® QC™ #1 Heavy-Duty Cleaner For wider, high tonnage belts, the MARTIN® QC™ #1 Heavy-Duty Cleaner incorporates a rugged belt cleaner blade and sturdy mainframe. Patented "CARP" Constant Angle Radial Pressure design maintains cleaning performance through all stages of belt cleaner blade life. One-pin blade replacement makes belt cleaner blade replacement an easy, one-minute, no-tool operation.
	The BOOT-LIFT® Railcar Connector installs between the rails to improve the unloading of railroad hopper cars. Models to Suit Any Car, Including double-or single-pocket, round-opening and GATX. Adapter plates allow interchangeability. Custom engineering is available.
	MARTIN® MIMCO™ GATE JACK™ Eliminate strong-arm tactics with the MARTIN® MIMCO™ GATE JACK™ Railcar Gate Opener. This air-powered wrench provides up to 1700 ft-lb. (235 kg-m) of torque to open the most stubborn hopper gate. Spot the car, open the gate, and start unloading.
	MARTIN® Railcar Opener powers open the most stubborn hopper car gate with 2700 ft-lb (3661 N-m) of torque at 90 psi (6.2 bar). Pivoting wheels allow unit to maintain contact with traveling capstan of rack and pinion gate opener on hopper cars. Pivoting wheels allow unit to maintain contact with traveling capstan of rack and pinion gate opener on hopper cars.

                                           

---

For more information or to receive a quotation on Martin Engineering, click here

---